Beautiful Work Best Way To Drill Holes For Cabinet Hardware

Fill Hole Or Holes With Wood Putty it is important to use enough putty to completely fill the hole without.

Best way to drill holes for cabinet hardware. Extra 2 Drill Bits 1 Set of Fittings Inch Metric 2 Scale 46 out of 5 stars. Avoid using the wrong hole by sticking masking tape over the template and poking through only the holes you need. If you do have to pre-drill again fill the first hole in with caulk or cover the hole with the cabinets hardware if possible.

Back to the cabinet handle site to order five more So now I had to fill in the old cabinet holes and drill new ones to match the holes on the other doors. Mark this with a pencil. The standard size drill bit that we have used for many years is 316 Open the cabinet door and place your guide on the proper edge and on the front-side of the door.

First order of business was off to the hardware store for some wood. For doors which are hung on the opposite side position the jig on back of the door hold or clamp a scrap of wood or plywood on the front to prevent tear out and drill the holes in the door from the inside. Now I just had to find the center on each drawer.

4 Drill your holes with a bit the same size or only. Instead of using a pencil to mark the location of the hole on the cabinet use an awl. Buy this wood awl from Amazon that will last 10 years.

Touch Up The. You always drill from the front to the backside. Drilling Holes for Cabinet Pulls.

3 Steps To Fill Holes In Your Cabinets. I had already drilled all my holes before I took pictures so just pretend that is a really big pencil mark and not a hole. That way your drill bit wont skate off in the wrong direction when you drill the hole.